顶固分公司 > 产品营销 > 暗铰 > 产品信息

    

产品特点:

1、主体由锌合金压铸而成，连接件采用优质304不锈钢制造。

2、铰链安装在门扇内，开启角度180度，关闭后铰链不外露,美观大方。

3、铰链在关门后，门缝隙小于1mm,可以用于折叠门。

4、暗铰链承重如下：按每扇门配3只计算

Feature

1、The corpus is die-casting by the zinc alligation but become, connecting 304  stainless clad steel productions of an adoption superior quality.

2、The hinge sets in a, openning 180 degrees of angle, after lock the hinge outside the anti, the beauty is generous.

3、The hinge is after close door, a blind side is is small in 1 mm, can used for the door of fold.

4、The dark hinge accept heavy as follows: Press each door to go together with 3 calculate

暗铰安装：

A.       根据实物和说明书，确定安装铰链的数量，并在适当位置画线。

B.       根据画线，在门扇上开孔，使铰座可以放入门扇。并用螺钉固定。

C.       在柜门侧板相应位置开孔，

D.       抬起门扇，使铰座可以插入柜门侧板的孔内，并用螺钉固定。

E.       调节铰链的位置。使门扇开启顺畅，间隙均匀。

F.       拧紧所有螺钉。

Invisible hinge Installation steps:

A.       According to the specification, make sure of the number of hinges, and draw lines at the appropriate place.

B.       According to the drawn lines, make holes on the glass.

C.       Make holes at the corresponding place on the side plate.

D.       Raise the door leaf, insert the hinge base into the hole of the side plate, and fix it with screws.

E.       Adjust the hinge to make sure the door open smoothly.

F.       Adjust it and screw down all the screws.

产品保养：

1、防止在搬运中出现的碰伤。

2、清洁时，先用软布或干棉纱除灰尘，再用干布沾少许防锈机油擦抹，最后用干布抹干，保持干燥

3、应防止酸碱盐类的侵蚀和沾污

Maintenance of products:

1、Prevention from the scratches during the conveying process. 

2、Try not to moisten the metallic plating pieces. Sweep with soft cloth or dry cotton yarn, then wipe out with dry cloth stained with a little anti-rust oil. Finally dry up with dry cloth. Keep dry.

3、Prevent from corrosion and staining.

 

本站首页 | 关于我们 | 历史文章 | 网站地图 | Google Sitemap | 信息反馈 | 时代财富网 | 网站建设 | 登录管理